...
DNS Server for DNSSEC validation: required to be a non-authoritative name server.
Authentication Options
Maximum Session Idle : This setting (minutes) controls how long a session can stay idle before being forced to log in again.
RADIUS authentication options (local install only)
Radius Enable
...
: Check this box to enable RADIUS functionality.
Radius Server Address
...
: Set to the IP address of your radius server. If this is specified, it will force authentication over radius.
Radius Authentication Port
...
: Set to the port for authentication. Default port is 1812
Radius Accounting Port
...
: Set to the port for radius accounting. Default port is 1813
Radius Key
...
: Set to the shared key of your radius server
LDAP authentication
LDAP Enable
...
: check the box to enable LDAP functionality.
LDAP Server Address
...
: Set the IP address of your LDAP server.
LDAP Port
...
: Set the port for your LDAP server
LDAP Security
...
: Select the security method of your LDAP server - SSL, TLS or None
LDAP Auth DN/Fetch DN
...
: These strings are used to first authentication the 6connect user and then to retrieve their permissions. The string '%LOGIN%' should be inserted in place of the user's common name both strings.
...
(ex: cn=%LOGIN%,ou=people,dc=6connect,dc=com)
Mapping Permissions to 6connect schema
...
: To integrate 6connect permissions with your existing directory structure then you will need the 6connect schema. It should snap in with any existing LDAP structure and allow you to assign 6connect permissions to your existing users. You can download a copy of the schema from this section.
Templates
...
This is where you can edit outgoing email templates for IP block assignments
...