Page tree
Skip to end of metadata
Go to start of metadata

Command Line Interface - ALPHA

Overview

The command line interface for ProVision is a beta feature that has been release for feedback.

How to Access the CLI from your browser

When logged into ProVision via a web browser, use the key combination "Control+Shift+S" or "Control+Shift+~" to access/close the CLI

CLI Commands (ALPHA)

CLI Help

When in the CLI, type:

ipam man

for sample commands and syntax

Currently, the CLI supports the following commands:

 

ipam <command> [-t] [<cidr>] [<resource name>] [<args>]

    show:     show details for a block. Examples:

                  - "ipam show 10.0.0.0/8" will show details for the block 10.0.0.0/8

                  - "ipam show holding" will show details for all blocks in the Holding Tank

                  - "ipam show "<resource name>"" will show details for all blocks assigned to <resource name>

 

    add:      add a block. ex: "ipam add 192.168.0.0/24"

 

    update:   update attributes for a block. ex: ipam update 192.168.0.0/24 --vlan=100 tags=VM,Dev

 

    assign:   assign a block to a resource. ex: ipam assign 192.168.0.0/24 "<resource name>"

 

    assign:   smart assign a block to a resource. ex: ipam assign --mask=24 --rir=ARIN --type=ipv4 "<resource name>"

 

    unassign: reclaims a block from a resource and places it in the Holding Tank. If the block is already in the holding tank, reclaims it an makes it available.
  • No labels