Configuring Secure64 Support

The initial setup of the Secure64 Authoritative server is as follows:

Step 1: Create an nsd.conf file under the root directory / of your S64 Auth server

[authdnsadmin@Secure64DNS]# cat nsd.conf 
server:
ip-address: 50.198.192.141 
 
axfr-logfile: /axfr_log/axfr.log
axfr-logfile-flush-count: 1
axfr-logfile-max-size: 100000
axfr-logfile-max-size: 10 

request-logfile: /request_log/request.log
request-logfile-flush-count: 10
request-logfile-max-size: 1000000
request-logfile-max-files: 10 
 
include: 6connect_nsd.conf 

Step 2: Make a directory for ProVision to push zone files to on the Secure64 DNS Server

[authdnsadmin@Secure64DNS]# mkdir test12 
[authdnsadmin@Secure64DNS]# ls
/:
322 2013-08-19 06:07:42 nsd.conf
<DIR> 1024 2013-08-16 17:30:12 test12

Step 3: Setup and Configure ProVision for your Secure64 DNS Server

To create a new server, start from the DNS Tab, select the DNS Servers sub menu. Then, click the "Add Server" button next to "DNS Server List".

This will open the "Server Settings" page.

Server Settings 

1) Set Server Common Settings

In the "Common Settings" section of Server Settings, enter the new server's Display Name (the name that will appear on the ProVision interface), the FQDN / IP, server type, DNS service type, and desired parent Resource (may be left at the default Top Level Resource). For Secure64 servers, ensure that DNS Service is set to "Secure64 Authority", "Secure64 x86 Authority", "Secure64 KNOT Authority", or "Secure64 Cache".

2) Set Server Specific Settings

The next section is entering server service-type specific settings. The options visible in this section will depend on the "DNS Service" type chosen under "Common Settings". 

Here, we see the fields for Secure64 server settings.

Enter the server Username, Password, Port, Remote Directory, Named Conf. Path, and whether to enabled SNMP. 

For SSH Public Key Authentication and Dynamic Option updates, click on the ON / OFF toggle to select "ON" or "OFF" for each as needed. 

After entering the server-specific settings in this section, you can click the "Test Connection" button at the bottom right of the page to test the server connection and authentication. 

A window will pop up showing a success or failure response.

3) Set DNS Group Settings for Server

In the last section, select whether to enable support for exporting DNS Groups as Views (click to toggle ON / OFF), and select a default Group, if desired, to be associated with the server. Zones assigned to the selected Group will automatically be attached to the server. 

4) Save Changes

Save your changes when done! Just click the "Save Changes" button at the bottom right of the page. 

Step 4: Associate zones to your Secure64 DNS Server(s)

If a default Group was selected while setting up the S64 server, then any zones in that Group will automatically be associated with the server. 

Zones may be manually added, moved, or imported into the Group - see Working with DNS Zones - Common Tasks and Working with DNS Groups for details on associating zones with Groups. 

If zones are to be imported, a DNS Group may be selected during the import process to associate with the zones.

Select the group specified as the default S64 server Group, then import the zones as described in the  Import DNS Zones documentation.

$ORIGIN 30 IN TYPE65464 ${p4} PTR ${a4}.pool.example.com.
$ORIGIN 600 IN TYPE65464 ${a4} A ${a4}
$ORIGIN TYPE65464 ${p6} PTR user${a6}.my.example.com.
$ORIGIN 5 IN SYNTH user${a6} AAAA ${a6}
$ORIGIN IN SYNTH nptr-${u} NAPTR 10 20 "A" "" "" srv-${u}
$ORIGIN IN SYNTH srv-${u} SRV 10 20 1234 srv-addr-${u}

Step 5: Push Zones to Secure64 Server(s)

Navigate back to the DNS tab, and select the "DNS Servers" tab.  

 Locate the Secure64 server in the DNS Servers list, and then click the "Push" button under "Actions" at the end of the row.

Step 6: Verify DNS Zone push on Secure64 Server(s)

The result of the Push can be checked/verified by checking the Secure64 server as follows:

Now, verify that the "788 2013-08-21 12:35:04" 6connect_nsd.conf file now exists.

[authdnsadmin@eval138.secure64.com]# ls
/:
6728 2013-08-13 00:15:30 nsd.conf
8416071 2013-08-21 12:35:07 nsd.db
788 2013-08-21 12:35:04 6connect_nsd.conf
<DIR> 1024 2013-08-21 12:34:50 test12 

You can verify the Push contents by doing a cat of the 6connect_nsd.conf

In the example above, two Zones have transferred.

To look at the contents of each zone you can cd to the proper directory /test12/6connectGeneric and find the zone files in an alphabetical directory structure as follows:

Step 7: Validate Zone data in Your Infrastructure

Finally, do a dig of the zones to verify the DNS configuration has been successfully deployed.

For any questions regarding the integration of Secure64 products into ProVision, please email 6connect at support@6connect.com, or Secure64 at support@secure64.com

Additional Information

For additional information on working in DNS, see the following sections:

• Working with DNS Servers
• Configuring ISC BIND Support
• Configuring PowerDNS Support
• Configuring Split Horizon and Views
• Configuring DNSSEC
• Import DNS Zones
• DNS Tab