Starting in 3.0, ProVision supports 6connect vendor-specific attributes (VSAs) for use with RADIUS authentication. To use these attributes, you must perform the following three procedures:
Add the 6connect VSA to the Radius Installation
To use the 6connect VSA, the attributes must be defined on the RADIUS server. Add the following RADIUS dictionary file to your RADIUS server and name it dictionary.6connect:
Important Note: Between version 3.9.3 and 4.0, the permissions structure for ProVision was signifigantly changed. Make sure you following the version specific instructions below.
ProVision 3.9.3 and prior: http://cloud.6connect.com/Download/Radius/3.9.3/6connect_VSA.txt
ProVision 4.0 and greater: http://cloud.6connect.com/Download/Radius/4.0/6connect_VSA.txt
Make sure to add the following to the primary dictionary file: $INCLUDE dictionary.6connect
Configure Radius Accounts
On the Radius server, configure the user accounts that will have access to the ProVision system.
An example of a ProVision account configuration for the user file on a Freeradius system for version 3.9.3 and prior: http://cloud.6connect.com/Download/Radius/3.9.3/Freeradius-users-example.txt
An example of a ProVision account configuration for the user file on a Freeradius system for version 4.0 and greater: http://cloud.6connect.com/Download/Radius/4.0/Freeradius-users-example.txt
Configure ProVision for Radius Authentication
To configure the use of Radius authentication with ProVision, follow the steps below.