The initial setup of the Secure64 Authoritive server is as follows:
Make sure to add the line include: 6connect_nsd.conf to the nsd.conf file |
[authdnsadmin@Secure64DNS]# cat nsd.conf server: ip-address: 50.198.192.138 axfr-logfile: /axfr_log/axfr.log axfr-logfile-flush-count: 1 axfr-logfile-max-size: 100000 axfr-logfile-max-size: 10 request-logfile: /request_log/request.log request-logfile-flush-count: 10 request-logfile-max-size: 1000000 request-logfile-max-files: 10 include: 6connect_nsd.conf |
[authdnsadmin@Secure64DNS]# cat nsd.conf
server:
ip-address: 50.198.192.138
axfr-logfile: /axfr_log/axfr.log
axfr-logfile-flush-count: 1
axfr-logfile-max-size: 100000
axfr-logfile-max-size: 10
request-logfile: /request_log/request.log
request-logfile-flush-count: 10
request-logfile-max-size: 1000000
request-logfile-max-files: 10
include: 6connect_nsd.conf
Make a directory for the 6Connect IPAM System to push the files to within the S64 Server.
[authdnsadmin@Secure64DNS]# mkdir test12
[authdnsadmin@Secure64DNS]# ls
/:
322 2013-08-19 06:07:42 nsd.conf
﹤DIR﹥ 1024 2013-08-16 17:30:12 test12
Go to the 6Connect Server and open up the DNS Admin New Server TAB and select the New Server Tab.
Fill in the information as follows:
Hit Test Config
Success! Will show as depicted above.
Click add server to add this server.
Search for all available zones or enter in a value to find specific existing zones in the system.
No character in the search area indicates a search for all zones as shown below.
Select the Select Server and as Master Tabs to assign the above zones to this server.
Verify the DNS Zones Tranfers area indicates your server and the # of zones to transfer. Hit the 3 Zones box and Push to transfer zones to this server.
The system will present the following live progress bar and show as follows when it is finished without errors.
Towards the bottom of the progress status will be the final indication of success or errors to correct.
The result of the Push can be checked/verified by checking the Secure64 server as follows:
ssh to 50.198.192.138
Login using rdonnelly/secure64
Enable cachednsadmin
Ls
Verify that the 788 2013-08-21 12:35:04 6connect_nsd.conf file now exists.
[authdnsadmin@eval138.secure64.com]# ls
/:
6728 2013-08-13 00:15:30 nsd.conf
8416071 2013-08-21 12:35:07 nsd.db
788 2013-08-21 12:35:04 6connect_nsd.conf
﹤DIR﹥ 1024 2013-08-21 12:34:50 test12
You can verify the Push contents by doing a cat of the 6connect_nsd.conf
[authdnsadmin@Secure64DNS]# cat 6connect_nsd.conf