...
For 3.9.3 and prior, test and response should look like the following:#﹥radtest test test
| Code Block | ||
|---|---|---|
| ||
#>radtest test test 50.23.215. |
...
162 6connect Sending Access-Request of id 179 to 50.23.215. |
...
162 port 1812 User-Name = "test" |
...
User-Password = "test" |
...
NAS-IP-Address = 10.124.47.6 |
...
NAS-Port = 0 |
...
Message-Authenticator = 0x00000000000000000000000000000000 |
...
rad_recv: Access-Accept packet from host 50.23.215. |
...
162 port 1812, id=179, length=68 |
...
priv_admin = 1 |
...
priv_ipam_c = 1 |
...
priv_ipam_m = 1 |
...
priv_ipam_d = 1 |
For 4.0 and higher, test and response should look like the following:
...