Quick-Start Tutorial 1

This is a basic walkthrough to set up a complete, working ACP workflow. 

This tutorial assumes you have access to a working 6connect ProVision instance. If you do not have a working 6connect ProVision instance, any other supported service can be used by substituting the applicable service and desired API endpoint information in Steps 4 through 7.

Step 1: Login to ACP

Open up a web browser and navigate to the login screen of the ACP installation.  Your username and password will have been provided with your license information, or sent to you by your network administrator.  Log in.

Step 2:  Start a New Workflow

Once you are logged in, select the “New Workflow” button from the center of the screen, or from the sidebar menu.

Step 3: Edit Workflow Information

Name 

New workflows are initially named “untitled”, and this name appears in the upper-left.

Give your Workflow a new name by clicking “edit” next to the current workflow name. Rename it as desired, then hit "close". 

Category

If desired, you can edit the category for your new workflow. Click on the current category ("uncategorized", for a new Workflow) to open the Select Category screen.

Click on the expand icons  to browse the category lists, or filter from the search box. Click on the desired category to select it, then click "update" to apply the category to your Workflow. 

Description

You may also add a description to your Workflow.

Double-Click inside the description field to edit the description, when complete click "Close" or click anywhere outside of the description field to exit out. 

Step 4: Configure Connector

The next step is to configure a connector to your 6connect ProVision (or other supported connector) service. Connectors are associated per-Workflow, so a new Workflow will need to either have a new connector instance created or one imported from an existing Workflow.

For this example, we will configure a new connector to a ProVision instance.

Click the “Connectors” button to the left of the “Save” button in the upper-right corner to bring up the Edit Connectors screen.  

From the select box, pick “sixconnect.”

Name this connector “ProVision 1” and supply the URL for your ProVision instance and a valid username and password for that instance. 

Use the ‘Test’ button to make sure the information is correct. If successful, a "Connector test success." message appears to confirm a valid connection.

After confirming the test succeeds, save the connector by clicking ‘Apply’, then ‘Close' to exit out of the connector screen and return to the Workflow page.

Step 5: Add Workflow Steps

Now it is time to add the first step of the Worfklow. 

From the “Workflow Steps” area on the Workflow page, select the connector we have just made:  “sixconnect - ProVision 1”. 

The middle box of the form will pull in all the API Endpoint Families for this product.  Pick ‘resources.’

The final box will pull in all of the specific endpoints belonging to that family.  Pick “Get resources” and click the ‘Add’ button to the right of the form.

The new step is added to the main ACP work area.  An ‘Output’ step is automatically created below it.

At this point - being that a valid step has been added - you can save your new workflow by clicking "Save" near the top right of the Workflow page.

After the first successful save of a new Workflow, the "Delete" and "Execute" buttons will be available. 

Step 6: Review Step Inputs & Options

Click the ‘Get Resources’ step we just created to view detailed information for the step. 

ACP has read in the API specification for this endpoint and will display forms for required and optional parameters, as well as additional step options. 

Available tabs for this step include General Options, Optional Inputs, Iteration Options, Sub Steps, Conditions & Routes, and Output. The ‘Get resource’ API call does not have any required parameters, so the "Required Inputs" tab is disabled.

Click on the "Optional Inputs" Tab. All optional parameters are initially set to ‘omitted,’ meaning they will not be included with the API call on this step.

w

To make this step do something a bit more useful, find the ‘Name’ parameter in the list of optional fields.  Change its drop-down from ‘omitted’ to ‘default value.’ This means this parameter will be a constant, defined in the text box which appears to the right.  Place the text ‘TLR’ in the 'default value' box.

This configures the API call to pull all the information about the resource named ‘TLR,’ which is the root of the ProVision resource hierarchy.

Step 7: Configure Output

While the previous step has fetched the data we need, we need to configure the Output step to return it to us.  Click the blue ‘GET RESOURCES’ header to collapse the first step.

Then click the black ‘OUTPUT’ header to expand the output section.  Currently, nothing is configured, and when the workflow is run it will return nothing.

Click ‘Add Parameter’ to add a new field to the output of this Workflow. Output parameter options will appear.

Change the name from ‘output-param-1’ to ‘id’, and then select ‘Workflow Link’ from the adjacent drop-down.  The form expands.

In ‘Workflow Link’ mode the third box contains all the steps of the workflow.  You can select parameters from any call to return in the output, either in whole or in part. 

Select ‘Get Resources → (object).’ Clicking on the fourth and last box will bring up a listing of all the parameters returned by the Get Resources call.

Choose ‘id.’  This will return a single field, which is the id of the resource named ‘TLR.’

Step 8: Save Changes

Hit the ‘Save’ button in the upper-right to save the changes made to any steps or the output. 

Step 9: Execute Workflow

Step 9:  Hit the ‘Execute’ button next to ‘Save.’ 

After the processing timer finishes, a Results section appears with the response object:  { "id": "1" }. We have queried the API for a resource named ‘TLR’ and have found that its resource id# is 1.

Step 10 (Optional): Review / Debug Workflow

For a more detailed look at what is going on, click on the ‘Preferences’ button between the ‘More Options’ and ‘Connectors’ links at the top of the screen. 

Turn ‘Debug Mode’ on, then Save the Workflow and re-execute it.

This time the Results section expands into detailed reporting of what parameters were sent at each step, what data came back, and what routing path was taken. 

Steps Tab

While Debug Mode is enabled, the results tab "Steps (Debug Mode)" will be available after executing a Workflow.

Each step of the workflow is listed on the left side of the results panel; clicking on a step will detail the inputs and outputs of that step. This will also show you which step(s) fail.

Raw Output Tab

Click on ‘Raw Output’ for the ‘Get resources’ step to see the full, raw response to our query. This is very helpful for finding errors.

Additional Tutorials

Congratulations! You have completed Quick-start Tutorial 1. If you would like to proceed to more advanced topics, continue on to the following tutorial:

• Quick-Start Tutorial 2